The same battery-swap cabinet has a completely different configuration approach when placed in a food-delivery business district versus at a community entrance. The reason lies not in the cabinet itself, but in the differing battery-swap rhythms of these four scenario types: food delivery is high-frequency and concentrated, express delivery is regular and stable, communities need safety and peace of mind, and scenic areas are short-term and low-frequency. Once you understand the patterns of each scenario type, the configuration becomes clear. This article explains the configuration logic for the four scenario types and includes our Dochion's actual practices in each.

Food Delivery Riders: High-Frequency and Concentrated, the Core Is Speed

Food delivery is the most typical battery-swap scenario. Riders swap batteries several times a day, concentrated in the two peak periods at noon and evening, and the swap action must be fast. So the hard indicators for this scenario type are just two: whether there are enough slots during peak periods, and whether the swap action is fast.
At this type of site, Dochion commonly uses large-capacity 12-slot or 16-slot cabinets to first ensure turnover capacity; for interaction, the tap-to-swap model, where riders don't need to take out their phones and can swap by tapping a button, is also commonly used here. Large capacity and few actions — that is the configuration approach for this scenario type.

Express Delivery: Regular and Stable, Package Plans Are More Cost-Effective

Express delivery differs from food delivery: the delivery rhythm is relatively regular, replenishment points are fixed, riders are less sensitive to "speed" but more concerned about cost and stability. Express delivery outlets are infrastructure that must operate every day; a single day of disruption means a day of complaints.
Therefore, this scenario type is better suited to 8-slot or 12-slot cabinets paired with package billing — bundled by month or by use, making costs predictable for couriers and helping operators better retain customers. Dochion also mostly uses this combination in express delivery scenarios, with stability remaining the bottom line.

Community Travel: Sufficient and Worry-Free, Eliminating Charging Hazards

The primary demand in community scenarios is not speed, but safety and convenience. Residents are most worried about the hazard of bringing electric bikes into buildings and homes to charge. Battery-swap cabinets move charging downstairs, which precisely solves this problem — no need to carry batteries home.
This type of site has stable but not high foot traffic; being sufficient, not disturbing residents, and cost-controllable is more important than stacking capacity. Dochion generally configures 5-slot or 8-slot cabinets, which occupy little space and require low investment, paired with a rental model so residents can swap batteries as needed.

Scenic Areas and Hotels: Short-Term and Low-Frequency, Billed by the Hour

Battery-swap demand in scenic areas is different again: tourists have short-distance, temporary, low-frequency range needs, perhaps swapping only once a day or even renting for just a few hours. The focus of this scenario type is not high-frequency turnover, but accurate site selection and flexible billing — making tourists willing to use it and remember to return it after use.
Dochion designs this scenario type with hourly billing and rent-and-swap-on-the-spot, placing cabinets in locations where tourists gather and that are convenient for returns.

Northeast Severe Cold: First Solve the "Can It Be Used" Problem

There is another category: special climate markets. In the Northeast, winter temperatures often drop to minus twenty or thirty degrees, and ordinary cabinets simply cannot charge at low temperatures — this is a hard threshold: whether the equipment can withstand it is the prerequisite for whether this business can be done at all.
In the north, Dochion configures cabinets with independent heating for each slot, automatically heating to the appropriate temperature before charging at low temperatures, with an operating temperature range covering -30℃ to +70℃; at the same time, we have set up local offices and service teams in the Northeast. With both equipment and service in place, the severe cold market becomes viable.

Choosing a Site Is Just as Important as Choosing a Cabinet

Finally, a pattern that is easily overlooked: whether the site is chosen correctly often affects whether this battery-swap operation can run better.
Many beginners look only at whether the rent is cheap for their first site, and end up with insufficient foot traffic and cabinets sitting empty all day. Others spend heavily on the busiest site without calculating whether that site's battery-swap frequency can support such a large capacity. There is another point: the operational approach for 3 sites differs from that for 30 sites — with few sites, one person doing inspections and handling minor issues themselves is enough; with many sites, relying on manual monitoring becomes strenuous, and tiered system management saves considerable effort.
This is the experience we have accumulated from the four scenario types: first look clearly at the foot traffic, rhythm, and space of the site, then come back to decide the cabinet's slot count and configuration. There is no standard answer for the four scenario types, but each has its own solution — only by thoroughly understanding the scenario can you know how to configure the cabinet.